Habit is one of the most expensive forces in part design. Many parts are made of metal simply because the first iteration was, and each revision carried that choice forward. Yet engineering polymers have advanced significantly and now rival metal in reliable performance for many applications. They are often far more cost-effective as well.
For this reason, many sourcing teams are pursuing metal-to-plastic conversion for their components. When handled by an experienced injection molder, the result is a lighter part that costs less to produce at high volume.
Thogus is not here to argue that plastic can replace metal in every case. We’re here to explain when making the switch can deliver the greatest value. Our guide below outlines the conditions that favor metal-to-plastic conversion. For application-specific recommendations, or to explore our capabilities and material expertise, give us a call.
Signs You Should Consider Metal to Plastic Conversion
The strongest candidates for metal-to-plastic conversion have several traits in common. No single characteristic guarantees success, but parts with several of these traits warrant a closer evaluation.
Production Volume Offsets Tooling Costs
Plastic injection molding requires an initial investment in a production mold, often offset by lower per-part costs over the program’s life. Annual volumes in the tens of thousands typically offer a favorable break-even point. For small, infrequent orders, the existing process may remain the better option.
Metal Finishing Adds Labor and Lead Time
Machined metal parts typically need deburring and a protective finish before they are ready for use. Some of this work goes to outside vendors and adds to the lead time. Injection molding removes many of these steps, as color and threads can be molded directly into the part.
When a plastic part does need additional finishing, Thogus handles secondary operations in-house. These processes cost considerably less for plastic than for metal and keeping them under one roof gives you greater control over cost.
Parts Can Be Consolidated
Metal-to-plastic conversions typically allow engineering teams to combine assembly features that would otherwise require separate components. For example, a housing and its mounting clip can become a single molded part. Reducing the component count means fewer fasteners and fewer opportunities for error. These changes can deliver substantial savings for many programs.
Less Weight Could Lower Costs and Improve Performance
Heavy metal components increase shipping expenses and often make finished assemblies more cumbersome to handle. A metal-to-plastic conversion can substantially reduce weight and deliver lasting savings along with better product performance.
Corrosion Is a Recurring Issue
Metal parts frequently exposed to moisture or abrasive chemicals in the field require protective coatings to last. Many commodity plastics and engineered resins naturally resist corrosion. When the resin is matched to the conditions of the application, parts can deliver lasting performance without an added finish.
Redesigning Parts for Injection Molding
Simply swapping materials without reworking the part design is a common cause of failed metal-to-plastic conversions. Features suited to metal machining, such as thick walls and sharp corners, can create defects and weak points in a molded part.
Successful conversion requires redesigning the part for injection molding without compromising its function. Thogus engineers follow these core principles to achieve flawless results:
- Uniform wall thickness: Ensures even cooling and dimensional stability
- Ribs and gussets: Often replace solid sections to maintain stiffness at a fraction of the weight
- Generous radii at corners: Prevents stress concentration and improves resin flow
- Draft angels: Help the part to release cleanly out of the mold
Matching the Polymer to the Application
Effective metal-to-plastic conversion hinges on selecting the most suitable polymer for the part’s working environment. Engineering resins encompass a broad range, from glass-filled nylons to high-performance PEEK. At Thogus, we base our material recommendations on how each resin performs under sustained loads. Plastics can creep over time and lose strength as temperatures rise. The right resin must hold its strength at the part's peak operating temperature and satisfy all chemical compatibility and regulatory requirements.
Start the Metal to Plastic Conversion Process
Metal-to-plastic conversion makes sense when annual volume justifies tooling costs, and engineering polymers meet the application requirements. It delivers the greatest value when the part is redesigned for injection molding to consolidate components or reduce weight.
Have a metal part worth evaluating for conversion? Reach out to Thogus today for engineering support and design for injection molding solutions.
Experience the Thogus Difference
Connect with us today to discuss your project and to learn more about our capabilities.